robotic blow

Portrait of the Artist as a Young Robot When it comes making art most of us operate under a set of rules we learned when drawing, writing or composing music. So what happens when you feed machines code for churning out art? Turns out plenty, and some of it can be construed as autonomously creative. And if creativity is the seat of the soul, what does that say about our uniqueness when a machine can create its own spark of originality? Join the conversation on how machines will alter the future of art. Plus, be sure to check out Studio 360's art section as well as my curiosity article "10 Ways Robots Could Replace Humans."
Motion Controls Robotics’ created the Robotic SUBTA system, a pre-engineered robotic system designed for PET blow-molded bottle handling. The system uses different robotic units depending on the type of machine that is being unloaded. The Robotic SUBTA system grabs and sets the bottles on a conveyor, standing up, acting as a takeaway unit. The system provides increased throughput due to high reliability and uptime and cycle times faster than most mold machine rates. The Robotic SUBTA system also requires a minimum of floor space, a high priced commodity in a manufacturing facility.
The company contacted Motion Controls Robotics to ask them to help develop a solution that would automate its bottle take out process and alleviate its safety and ergonomic issues due to repetitive stress injuries. They also wanted to create a solution that would reduce scrap, which ultimately would help increase sales without having to produce more product than it did in the past.
©News Group Newspapers Limited in England No. 679215 Registered office: 1 London Bridge Street, London, SE1 9GF. "The Sun", "Sun", "Sun Online" are registered trademarks or trade names of News Group Newspapers Limited. This service is provided on News Group Newspapers' Limited's Standard Terms and Conditions in accordance with our Privacy & Cookie Policy. To inquire about a licence to reproduce material, visit our Syndication site. View our online Press Pack. For other inquiries, Contact Us. To see all content on The Sun, please use the Site Map. The Sun website is regulated by the Independent Press Standards Organisation (IPSO)
Portrait of the Artist as a Young Robot When it comes making art most of us operate under a set of rules we learned when drawing, writing or composing music. So what happens when you feed machines code for churning out art? Turns out plenty, and some of it can be construed as autonomously creative. And if creativity is the seat of the soul, what does that say about our uniqueness when a machine can create its own spark of originality? Join the conversation on how machines will alter the future of art. Plus, be sure to check out Studio 360's art section as well as my curiosity article "10 Ways Robots Could Replace Humans."
Everything in the plant runs much more smoothly. More bottles are being produced, but the pace seems slower since there was a reduction in complexity in the system,” said the plant manager. “We have seen a reduction in the commotion and activity since employees can now work at a constant pace and succeed without as much physical effort. We also have a greater chance to understand the bottlenecks in the manufacturing process. We are reviewing to see where we can make an economic justification for adding automation,” said the plant manager. “We chose the ones that are simple to execute first that run one mold all day, as well as the systems with the highest stress strain or ergonomic safety issues. We are looking for future automation as soon as we can.
It combines the automatic feeder with the automatically moving electric screwdriver to realize the complementary supply of screws and the locking, which greatly improves the production efficiency and saves manpower. Once the screwdriver is lifted after locking the screw, the automatic feeder will send the other screw to the Escape of the automatic feeder. The screwdriver head absorbs the screw and the robot can automatically move according to the coordinate point and tighten it. This is particularly suitable for multi-station workpieces of the same specification. 
It combines the automatic feeder with the automatically moving electric screwdriver to realize the complementary supply of screws and the locking, which greatly improves the production efficiency and saves manpower. Once the screwdriver is lifted after locking the screw, the automatic feeder will send the other screw to the Escape of the automatic feeder. The screwdriver head absorbs the screw and the robot can automatically move according to the coordinate point and tighten it. This is particularly suitable for multi-station workpieces of the same specification. 

The plastics manufacturer had used its manual take out system for its entire history for nearly 20 years. This manual system had several pitfalls including a large amount of scrap, which in turn meant money down the drain in throwaway products. The manual system also lacked reliability and increased chances for injuries. The company brought technology into its facility to help increase the production of quality products while making the plant safer for its employees. The company also hoped to increase its sales by improving the manufacturing process efficiencies through automation. Prior to automation, the company had to turn away opportunities to increase its business due to capacity limitations.

It combines the automatic feeder with the automatically moving electric screwdriver to realize the complementary supply of screws and the locking, which greatly improves the production efficiency and saves manpower. Once the screwdriver is lifted after locking the screw, the automatic feeder will send the other screw to the Escape of the automatic feeder. The screwdriver head absorbs the screw and the robot can automatically move according to the coordinate point and tighten it. This is particularly suitable for multi-station workpieces of the same specification. 
The plastics manufacturer had used its manual take out system for its entire history for nearly 20 years. This manual system had several pitfalls including a large amount of scrap, which in turn meant money down the drain in throwaway products. The manual system also lacked reliability and increased chances for injuries. The company brought technology into its facility to help increase the production of quality products while making the plant safer for its employees. The company also hoped to increase its sales by improving the manufacturing process efficiencies through automation. Prior to automation, the company had to turn away opportunities to increase its business due to capacity limitations.
Motion Controls Robotics’ created the Robotic SUBTA system, a pre-engineered robotic system designed for PET blow-molded bottle handling. The system uses different robotic units depending on the type of machine that is being unloaded. The Robotic SUBTA system grabs and sets the bottles on a conveyor, standing up, acting as a takeaway unit. The system provides increased throughput due to high reliability and uptime and cycle times faster than most mold machine rates. The Robotic SUBTA system also requires a minimum of floor space, a high priced commodity in a manufacturing facility.
The company contacted Motion Controls Robotics to ask them to help develop a solution that would automate its bottle take out process and alleviate its safety and ergonomic issues due to repetitive stress injuries. They also wanted to create a solution that would reduce scrap, which ultimately would help increase sales without having to produce more product than it did in the past.
The Robotic SUBTA system is also flexible and precise since it handles any mold configuration (single or double row) and provides quick changeover using quick change tooling. This programmable built-in operator pendant has stored recipes and menu selection for patterns and allows for on-the-fly adjustments. The 20-part recipe keeps part data such as part description pick, place locations, and vacuum pattern.

About the Author: Robert Lamb spent his childhood reading books and staring into the woods — first in Newfoundland, Canada and then in rural Tennessee. There was also a long stretch in which he was terrified of alien abduction. He earned a degree in creative writing. He taught high school and then attended journalism school. He wrote for the smallest of small-town newspapers before finally becoming a full-time science writer and podcaster. He’s currently a senior writer at HowStuffWorks and has co-hosted the science podcast Stuff to Blow Your Mind since its inception in 2010. In his spare time, he enjoys traveling with his wife Bonnie, discussing dinosaurs with his son Bastian and crafting the occasional work of fiction.


Compared to a different take out system, six axis robots give us an option to even pack the bottle or bring it to a leak detection machine. Now we have dwell time at the robot,” said the plant manager. “Six axis robots give us the ability to look at secondary operations and an opportunity to potentially add some value to our customer’s process. We can present it to our customers as a benefit. Efficiency at the facility has been greatly affected by the addition of Robotic SUBTA units.

It combines the automatic feeder with the automatically moving electric screwdriver to realize the complementary supply of screws and the locking, which greatly improves the production efficiency and saves manpower. Once the screwdriver is lifted after locking the screw, the automatic feeder will send the other screw to the Escape of the automatic feeder. The screwdriver head absorbs the screw and the robot can automatically move according to the coordinate point and tighten it. This is particularly suitable for multi-station workpieces of the same specification. 
×