robotic blow

Everything in the plant runs much more smoothly. More bottles are being produced, but the pace seems slower since there was a reduction in complexity in the system,” said the plant manager. “We have seen a reduction in the commotion and activity since employees can now work at a constant pace and succeed without as much physical effort. We also have a greater chance to understand the bottlenecks in the manufacturing process. We are reviewing to see where we can make an economic justification for adding automation,” said the plant manager. “We chose the ones that are simple to execute first that run one mold all day, as well as the systems with the highest stress strain or ergonomic safety issues. We are looking for future automation as soon as we can.
The plastics manufacturer also considered a vendor with a fixed automation system that included a simple slide but decided that system wasn’t reliable enough for its needs. In addition, every time the mold tooling changed, the slide also had to be changed to accommodate the new product. This created a higher cost to change tooling that was not acceptable. The facility included one machine with a manufacturers fixed automation system, but they wanted to find a more flexible and reliable solution.
About the Author: Robert Lamb spent his childhood reading books and staring into the woods — first in Newfoundland, Canada and then in rural Tennessee. There was also a long stretch in which he was terrified of alien abduction. He earned a degree in creative writing. He taught high school and then attended journalism school. He wrote for the smallest of small-town newspapers before finally becoming a full-time science writer and podcaster. He’s currently a senior writer at HowStuffWorks and has co-hosted the science podcast Stuff to Blow Your Mind since its inception in 2010. In his spare time, he enjoys traveling with his wife Bonnie, discussing dinosaurs with his son Bastian and crafting the occasional work of fiction.
About the Author: Robert Lamb spent his childhood reading books and staring into the woods — first in Newfoundland, Canada and then in rural Tennessee. There was also a long stretch in which he was terrified of alien abduction. He earned a degree in creative writing. He taught high school and then attended journalism school. He wrote for the smallest of small-town newspapers before finally becoming a full-time science writer and podcaster. He’s currently a senior writer at HowStuffWorks and has co-hosted the science podcast Stuff to Blow Your Mind since its inception in 2010. In his spare time, he enjoys traveling with his wife Bonnie, discussing dinosaurs with his son Bastian and crafting the occasional work of fiction.
A national manufacturer of stock and custom plastic packaging solutions for the food packaging, chemical, automotive and household industries faced the challenge of improving its safety and ergonomics associated with its manual system of unloading its Nissei Bottle Making Machine at its manufacturing facility. The company also wanted to find a solution to reduce scrap and increase productivity.

©News Group Newspapers Limited in England No. 679215 Registered office: 1 London Bridge Street, London, SE1 9GF. "The Sun", "Sun", "Sun Online" are registered trademarks or trade names of News Group Newspapers Limited. This service is provided on News Group Newspapers' Limited's Standard Terms and Conditions in accordance with our Privacy & Cookie Policy. To inquire about a licence to reproduce material, visit our Syndication site. View our online Press Pack. For other inquiries, Contact Us. To see all content on The Sun, please use the Site Map. The Sun website is regulated by the Independent Press Standards Organisation (IPSO)


It combines the automatic feeder with the automatically moving electric screwdriver to realize the complementary supply of screws and the locking, which greatly improves the production efficiency and saves manpower. Once the screwdriver is lifted after locking the screw, the automatic feeder will send the other screw to the Escape of the automatic feeder. The screwdriver head absorbs the screw and the robot can automatically move according to the coordinate point and tighten it. This is particularly suitable for multi-station workpieces of the same specification. 
Compared to a different take out system, six axis robots give us an option to even pack the bottle or bring it to a leak detection machine. Now we have dwell time at the robot,” said the plant manager. “Six axis robots give us the ability to look at secondary operations and an opportunity to potentially add some value to our customer’s process. We can present it to our customers as a benefit. Efficiency at the facility has been greatly affected by the addition of Robotic SUBTA units.

The Amazing Minds of Infants Just what goes on inside the minds of babes? Quite a lot as it turns out. In this episode of Stuff to Blow Your Mind, Julie and I peer inside the infant brain to learn about their enhanced state of consciousness and innate knowledge of reality. Plus find out what baby brains have to do with alien abductions? Along those lines, be sure to check out Julie's work over at the "Parentables" blog, our episode on alien abduction experiences and this excellent Skeptic Magazine article.
The Robotic SUBTA system is also flexible and precise since it handles any mold configuration (single or double row) and provides quick changeover using quick change tooling. This programmable built-in operator pendant has stored recipes and menu selection for patterns and allows for on-the-fly adjustments. The 20-part recipe keeps part data such as part description pick, place locations, and vacuum pattern.
So what are Julie and I up to this week? Well, in addition to recording episodes on personhood, milk and mermaids, we also published two exciting episodes that should expand your mind on the topics of human creativity, machine intelligence and the processing power of the human infant. So here are the breakdowns as well as the embedded feeds for each episode.
It's like this: I've always wanted to try a Fleshlight. Who wouldn't want to try a Fleshlight? But then again, who wants to be someone who has used a Fleshlight? Sure, we can all claim to live in a very sex-positive generation, but there is a major stigma involved with the kind of person who owns a pocket vagina. Say the words “Fleshlight owner” out loud, and you'll automatically picture some chunky men's rights activist in a “Take Me to Your Dealer” t-shirt who lives at home and works in middle management at a Best Buy.
A national manufacturer of stock and custom plastic packaging solutions for the food packaging, chemical, automotive and household industries faced the challenge of improving its safety and ergonomics associated with its manual system of unloading its Nissei Bottle Making Machine at its manufacturing facility. The company also wanted to find a solution to reduce scrap and increase productivity.
It's like this: I've always wanted to try a Fleshlight. Who wouldn't want to try a Fleshlight? But then again, who wants to be someone who has used a Fleshlight? Sure, we can all claim to live in a very sex-positive generation, but there is a major stigma involved with the kind of person who owns a pocket vagina. Say the words “Fleshlight owner” out loud, and you'll automatically picture some chunky men's rights activist in a “Take Me to Your Dealer” t-shirt who lives at home and works in middle management at a Best Buy.
About the Author: Robert Lamb spent his childhood reading books and staring into the woods — first in Newfoundland, Canada and then in rural Tennessee. There was also a long stretch in which he was terrified of alien abduction. He earned a degree in creative writing. He taught high school and then attended journalism school. He wrote for the smallest of small-town newspapers before finally becoming a full-time science writer and podcaster. He’s currently a senior writer at HowStuffWorks and has co-hosted the science podcast Stuff to Blow Your Mind since its inception in 2010. In his spare time, he enjoys traveling with his wife Bonnie, discussing dinosaurs with his son Bastian and crafting the occasional work of fiction.
×