robotic blow

The plastics manufacturer also considered a vendor with a fixed automation system that included a simple slide but decided that system wasn’t reliable enough for its needs. In addition, every time the mold tooling changed, the slide also had to be changed to accommodate the new product. This created a higher cost to change tooling that was not acceptable. The facility included one machine with a manufacturers fixed automation system, but they wanted to find a more flexible and reliable solution.

The Motion Controls Robotic SUBTA has received a positive reception from the employees because of the ease of use and nearly flawless performance of these robots. To ward off any concerns from employees about potential layoffs within the plant, the company presented the new system as an opportunity to ramp up its technology and that new business was waiting for the company if the technology was added.


Screw Locking Machine, Screw Locking Robot, Screw Locking Equipment manufacturer / supplier in China, offering Desktop Robotic Screwdriver/Desktop 4-Axis Blow-Type Double Head Double Y Screw Locking Robot/Automatic Fastening Machine/Automatic Locking System, Desktop 4-Axis Blow-Type Double Head Double Y Automatic Fastening System, Desktop 4-Axis Blow-Type Double Head Double Y Automatic Fastening Machine and so on.


About the Author: Robert Lamb spent his childhood reading books and staring into the woods — first in Newfoundland, Canada and then in rural Tennessee. There was also a long stretch in which he was terrified of alien abduction. He earned a degree in creative writing. He taught high school and then attended journalism school. He wrote for the smallest of small-town newspapers before finally becoming a full-time science writer and podcaster. He’s currently a senior writer at HowStuffWorks and has co-hosted the science podcast Stuff to Blow Your Mind since its inception in 2010. In his spare time, he enjoys traveling with his wife Bonnie, discussing dinosaurs with his son Bastian and crafting the occasional work of fiction.
Motion Controls Robotics’ created the Robotic SUBTA system, a pre-engineered robotic system designed for PET blow-molded bottle handling. The system uses different robotic units depending on the type of machine that is being unloaded. The Robotic SUBTA system grabs and sets the bottles on a conveyor, standing up, acting as a takeaway unit. The system provides increased throughput due to high reliability and uptime and cycle times faster than most mold machine rates. The Robotic SUBTA system also requires a minimum of floor space, a high priced commodity in a manufacturing facility.
The plastics manufacturer had used its manual take out system for its entire history for nearly 20 years. This manual system had several pitfalls including a large amount of scrap, which in turn meant money down the drain in throwaway products. The manual system also lacked reliability and increased chances for injuries. The company brought technology into its facility to help increase the production of quality products while making the plant safer for its employees. The company also hoped to increase its sales by improving the manufacturing process efficiencies through automation. Prior to automation, the company had to turn away opportunities to increase its business due to capacity limitations.
Everything in the plant runs much more smoothly. More bottles are being produced, but the pace seems slower since there was a reduction in complexity in the system,” said the plant manager. “We have seen a reduction in the commotion and activity since employees can now work at a constant pace and succeed without as much physical effort. We also have a greater chance to understand the bottlenecks in the manufacturing process. We are reviewing to see where we can make an economic justification for adding automation,” said the plant manager. “We chose the ones that are simple to execute first that run one mold all day, as well as the systems with the highest stress strain or ergonomic safety issues. We are looking for future automation as soon as we can.
It combines the automatic feeder with the automatically moving electric screwdriver to realize the complementary supply of screws and the locking, which greatly improves the production efficiency and saves manpower. Once the screwdriver is lifted after locking the screw, the automatic feeder will send the other screw to the Escape of the automatic feeder. The screwdriver head absorbs the screw and the robot can automatically move according to the coordinate point and tighten it. This is particularly suitable for multi-station workpieces of the same specification. 
Everything in the plant runs much more smoothly. More bottles are being produced, but the pace seems slower since there was a reduction in complexity in the system,” said the plant manager. “We have seen a reduction in the commotion and activity since employees can now work at a constant pace and succeed without as much physical effort. We also have a greater chance to understand the bottlenecks in the manufacturing process. We are reviewing to see where we can make an economic justification for adding automation,” said the plant manager. “We chose the ones that are simple to execute first that run one mold all day, as well as the systems with the highest stress strain or ergonomic safety issues. We are looking for future automation as soon as we can.
×