robotic blow

The Model SD-185 Screwdriver head is equipped with placement jaws and a feed tube attachment. The feed tube conveys the fasteners from a vibratory feeder bowl to the placement jaws. A wide range of fastener types can be fed and driven by this screwdriver and the size of the feeder bowl is determined by the physical size of the chosen fastener. Fasteners can be driven into a workpiece to either a predetermined torque setting or to a specific depth setting. The screwdriver head has built-in sensing to confirm proper insertion of each fastener. This screwdriver may be purchased as a complete tooled system with controls and vibratory feed system.
It combines the automatic feeder with the automatically moving electric screwdriver to realize the complementary supply of screws and the locking, which greatly improves the production efficiency and saves manpower. Once the screwdriver is lifted after locking the screw, the automatic feeder will send the other screw to the Escape of the automatic feeder. The screwdriver head absorbs the screw and the robot can automatically move according to the coordinate point and tighten it. This is particularly suitable for multi-station workpieces of the same specification. 
The plastics manufacturer also considered a vendor with a fixed automation system that included a simple slide but decided that system wasn’t reliable enough for its needs. In addition, every time the mold tooling changed, the slide also had to be changed to accommodate the new product. This created a higher cost to change tooling that was not acceptable. The facility included one machine with a manufacturers fixed automation system, but they wanted to find a more flexible and reliable solution.

The Robotic SUBTA systems have also created unexpected improvements in the manufacturing process. The company noted a net reduction of 1/2 percent of scrap, adding 500,000 bottles per year to its output simply by virtue of not dropping the bottles. Since fewer products need to be reground, the company also saves money considering the cost to run the regrind machines has gone up greatly as the cost of oil increases. In addition, this reliable process has cut the employee bending movements by 50 percent.
×