robotic blow

The Robotic SUBTA system is also flexible and precise since it handles any mold configuration (single or double row) and provides quick changeover using quick change tooling. This programmable built-in operator pendant has stored recipes and menu selection for patterns and allows for on-the-fly adjustments. The 20-part recipe keeps part data such as part description pick, place locations, and vacuum pattern.

It combines the automatic feeder with the automatically moving electric screwdriver to realize the complementary supply of screws and the locking, which greatly improves the production efficiency and saves manpower. Once the screwdriver is lifted after locking the screw, the automatic feeder will send the other screw to the Escape of the automatic feeder. The screwdriver head absorbs the screw and the robot can automatically move according to the coordinate point and tighten it. This is particularly suitable for multi-station workpieces of the same specification. 


The company contacted Motion Controls Robotics to ask them to help develop a solution that would automate its bottle take out process and alleviate its safety and ergonomic issues due to repetitive stress injuries. They also wanted to create a solution that would reduce scrap, which ultimately would help increase sales without having to produce more product than it did in the past.


Portrait of the Artist as a Young Robot When it comes making art most of us operate under a set of rules we learned when drawing, writing or composing music. So what happens when you feed machines code for churning out art? Turns out plenty, and some of it can be construed as autonomously creative. And if creativity is the seat of the soul, what does that say about our uniqueness when a machine can create its own spark of originality? Join the conversation on how machines will alter the future of art. Plus, be sure to check out Studio 360's art section as well as my curiosity article "10 Ways Robots Could Replace Humans."


The Amazing Minds of Infants Just what goes on inside the minds of babes? Quite a lot as it turns out. In this episode of Stuff to Blow Your Mind, Julie and I peer inside the infant brain to learn about their enhanced state of consciousness and innate knowledge of reality. Plus find out what baby brains have to do with alien abductions? Along those lines, be sure to check out Julie's work over at the "Parentables" blog, our episode on alien abduction experiences and this excellent Skeptic Magazine article.
Motion Controls Robotics’ created the Robotic SUBTA system, a pre-engineered robotic system designed for PET blow-molded bottle handling. The system uses different robotic units depending on the type of machine that is being unloaded. The Robotic SUBTA system grabs and sets the bottles on a conveyor, standing up, acting as a takeaway unit. The system provides increased throughput due to high reliability and uptime and cycle times faster than most mold machine rates. The Robotic SUBTA system also requires a minimum of floor space, a high priced commodity in a manufacturing facility.
Everything in the plant runs much more smoothly. More bottles are being produced, but the pace seems slower since there was a reduction in complexity in the system,” said the plant manager. “We have seen a reduction in the commotion and activity since employees can now work at a constant pace and succeed without as much physical effort. We also have a greater chance to understand the bottlenecks in the manufacturing process. We are reviewing to see where we can make an economic justification for adding automation,” said the plant manager. “We chose the ones that are simple to execute first that run one mold all day, as well as the systems with the highest stress strain or ergonomic safety issues. We are looking for future automation as soon as we can.
The Motion Controls Robotic SUBTA has received a positive reception from the employees because of the ease of use and nearly flawless performance of these robots. To ward off any concerns from employees about potential layoffs within the plant, the company presented the new system as an opportunity to ramp up its technology and that new business was waiting for the company if the technology was added.
It combines the automatic feeder with the automatically moving electric screwdriver to realize the complementary supply of screws and the locking, which greatly improves the production efficiency and saves manpower. Once the screwdriver is lifted after locking the screw, the automatic feeder will send the other screw to the Escape of the automatic feeder. The screwdriver head absorbs the screw and the robot can automatically move according to the coordinate point and tighten it. This is particularly suitable for multi-station workpieces of the same specification. 
It combines the automatic feeder with the automatically moving electric screwdriver to realize the complementary supply of screws and the locking, which greatly improves the production efficiency and saves manpower. Once the screwdriver is lifted after locking the screw, the automatic feeder will send the other screw to the Escape of the automatic feeder. The screwdriver head absorbs the screw and the robot can automatically move according to the coordinate point and tighten it. This is particularly suitable for multi-station workpieces of the same specification. 
The plastics manufacturer had used its manual take out system for its entire history for nearly 20 years. This manual system had several pitfalls including a large amount of scrap, which in turn meant money down the drain in throwaway products. The manual system also lacked reliability and increased chances for injuries. The company brought technology into its facility to help increase the production of quality products while making the plant safer for its employees. The company also hoped to increase its sales by improving the manufacturing process efficiencies through automation. Prior to automation, the company had to turn away opportunities to increase its business due to capacity limitations.
The plastics manufacturer had used its manual take out system for its entire history for nearly 20 years. This manual system had several pitfalls including a large amount of scrap, which in turn meant money down the drain in throwaway products. The manual system also lacked reliability and increased chances for injuries. The company brought technology into its facility to help increase the production of quality products while making the plant safer for its employees. The company also hoped to increase its sales by improving the manufacturing process efficiencies through automation. Prior to automation, the company had to turn away opportunities to increase its business due to capacity limitations.
About the Author: Robert Lamb spent his childhood reading books and staring into the woods — first in Newfoundland, Canada and then in rural Tennessee. There was also a long stretch in which he was terrified of alien abduction. He earned a degree in creative writing. He taught high school and then attended journalism school. He wrote for the smallest of small-town newspapers before finally becoming a full-time science writer and podcaster. He’s currently a senior writer at HowStuffWorks and has co-hosted the science podcast Stuff to Blow Your Mind since its inception in 2010. In his spare time, he enjoys traveling with his wife Bonnie, discussing dinosaurs with his son Bastian and crafting the occasional work of fiction.

The plastics manufacturer had used its manual take out system for its entire history for nearly 20 years. This manual system had several pitfalls including a large amount of scrap, which in turn meant money down the drain in throwaway products. The manual system also lacked reliability and increased chances for injuries. The company brought technology into its facility to help increase the production of quality products while making the plant safer for its employees. The company also hoped to increase its sales by improving the manufacturing process efficiencies through automation. Prior to automation, the company had to turn away opportunities to increase its business due to capacity limitations.
It's like this: I've always wanted to try a Fleshlight. Who wouldn't want to try a Fleshlight? But then again, who wants to be someone who has used a Fleshlight? Sure, we can all claim to live in a very sex-positive generation, but there is a major stigma involved with the kind of person who owns a pocket vagina. Say the words “Fleshlight owner” out loud, and you'll automatically picture some chunky men's rights activist in a “Take Me to Your Dealer” t-shirt who lives at home and works in middle management at a Best Buy.
×